Powder Coating
Powder coating is applied by a gun that is a free-flowing, dry powder. The coating is electrostatically applied then oven cured at 350°. It creates a hard finish that is tougher than conventional paint.
Typical Application: Fencing, Garage Doors, Automotive equipment, Bicycle parts, Marine applications and much more.
There are several advantages of powder coating over conventional liquid coatings.
Powder coatings emit zero or near zero volatile organic compounds (VOC).
Powder coatings emit zero or near zero volatile organic compounds (VOC). Powder coating overspray can be recycled and thus it is possible to achieve nearly 100% use of the coating.
Powder coating overspray can be recycled and thus it is possible to achieve nearly 100% use of the coating. Powder coatings can produce a much thicker coating than conventional liquid coatings without running or sagging.
Powder coatings can produce a much thicker coating than conventional liquid coatings without running or sagging.Powder coating produces less hazardous waste than conventional liquid coatings.
Powder coating produces less hazardous waste than conventional liquid coatings. A wide range of colors and special effects are easily accomplished which would be impossible to achieve with other coating processes.
A wide range of colors and special effects are easily accomplished which would be impossible to achieve with other coating processes.Call (530) 268-2222 or bring in your part for a quote.
If it is metal we can Powder Coat it.
Metal Design Service
5 Easy Steps.
•Summit 2D (flat) Drawing. It can be a pencil drawing with accurate dimensions.
Summit 2D (flat) Drawing. It can be a pencil drawing with accurate dimensions. •We transfer it to computer.
We transfer it to computer. •Laser cut the part
Laser cut the part•Bend with our brake if needed
Bend with our brake if needed•Powder coat
Powder coat
SMALL PANELS
MEDIUM PANELS
LARGE PANELS
CUSTOM PANELS
Powder Coating and Metal Design
Copyright © 2010 “RGB Display Corporation”. All Rights Reserved.
